48V / 100Ah Telecom Battery Pack

Features:

  • RS485 communication output for monitoring.
  • Built-in automatic protection for over-charge, over-discharge and over-temperature conditions.
  • Built-in BMS with a charging current limiting circuit.
  • Built-in battery optimal control algorithm to manage sleep/wake-up and intermittent charging mode to improve operation efficiency.
  • Built-in cell balancing function.
  • LED indicators state of charge and Alarm/Run status.
  • Compatible with standard telecom rectifiers.
  • Maintenance free.

TECHNICAL SPECIFICATION:

 

NOMINAL:
Voltage48.0 VDC
Nominal Capacity (25°C)100 Ah (Capacity is measured under0.5C / 25°C)
Cell Type and ChemistryPrismatic, LFP
Cell Make3.2V100Ah
Max Battery ModuleParallel8 No’s
ELECTRICAL:

Energy

Nominal Energy(25°C, 0.5C) 

Volumetric Energy Density 

Gravimetric Energy Density

 

4800 Wh (capacity is measured under0.5C / 25°C) 

184 Wh/L

107 Wh/kg

Standard Discharge (25°C) 
Maximum Continuous Current100 A
Low Voltage Cut-off42 VDC
Standard Charge(25°C) 
Maximum Continuous Current50 A
Recommended Charging Current30 A

Low Voltage Cut-off

Charging Voltage

54 VDC

53.25 VDC

Charge Current LimitFunctionYes
Internal Impedance< 19 mΩ
ENVIRONMENTAL:
Calendar Life(25°C)10 Years
Cycle Life (0.5C,DOD 80%, 25°C)> 6000cycles
Operating Temperature**0 to +65°C (De-rating from 35°C)
Storage Temperature0 to +55°C
BMS PARAMETERS:

 

Voltage (Charge)

Cell voltage protection: 3.60 V Cell Recover Voltage: 3.50 V Total voltage protection: 54 V

Total Voltage Recovery: 52.5 V

 

Voltage (Discharge)

Cell voltage protection: 2.8 V Cell Recover Voltage: 2.9 V Total voltage protection: 42 V

Total Voltage Recovery: 43.5 V

Current (Charge)

Normal ≤ 100 A

Charging currentlimiting function: > 110 A (10 sec) Charging current limiting function: > 125 A (3 sec)

 Short circuit protection: ≥ 320A (< 1 ms)


 

 


 

 

Contact Form

Looking for help or have a general inquiry?

Name is required.
Valid email is required.
Phone number must be 10 digits.